Pressing it again will select the 150Hz filter (middle LED illuminates). When connected to a camera or smartphone, we recommend you turn down the gain of your camera to, or close to, its lowest setting, and turn off any automatic gain controls that may be activated. Having both engaged is a failsafe way to ensure you always have a clean signal in unpredictable noisy environments. Bringing the signature broadcast-quality sound of the NTG shotgun mic range to a compact, feature-packed VideoMic, it’s the perfect audio solution for every kind of content creator. When connected to a computer, green indicates it is fully charged; blue indicates it is charging. These devices generally have poor-quality, noisy preamps. See the section above for details. Both the SC15 and VideoMic NTG are MFi-certified products, so you can be assured they will interact seamlessly with any of your iOS devices. Will the VideoMic NTG work with my computer or tablet PC? You can also plug your VideoMic NTG into an iOS device using the 3.5mm output, however, using the USB-C output with the SC15 gives you access to a host of features including headphone monitoring, the safety channel, and two-way audio transmission for making video calls. You will also need to make sure that your VideoMic NTG has the latest firmware installed, which you can download here. Press the button once to engage the -20dB pad (left LED will illuminate), Press once more to engage the safety channel (left LED will turn off, middle LED will illuminate), Press and third time to engage both the pad and safety channel (both LEDs will illuminate). Plugging your mic into your iOS device via USB gives you access to a host of features you can’t use with the 3.5mm output, unleashing its full potential. For added security, the switchable safety channel records a separate channel at -20dB in case the main channel clips. One of the most ingenious features of the VideoMic NTG is the USB-C output, which allows it to be used as a fully-featured USB microphone, as well as charging the internal battery. 107 Carnarvon Street, Silverwater, NSW, 2128 Australia. Most cameras have a headphone output you can use for this purpose. There are two high-pass filters available. Read more about using the pad and safety channel here. There is a cable management system with snug slots to accommodate your favourite type of cable, no matter the size. The VideoMic NTG features an in-built lithium-ion battery that provides 30+ hours of recording and charges via USB-C (from empty to full in two hours) The internal battery is not user replaceable. Access to the safety channel – The safety channel is a handy feature on the VideoMic NTG that outputs a second track of audio recorded 20dB lower than the original track in case your sound source gets very loud all of the sudden and your audio distorts. The safety channel will then ensure if the concert gets unexpectedly louder (for example a roar from the crowd), you will have a back-up track at a lower volume if the main audio track hits the end-stop of the meter in your device and distorts. Wind and other environmental noise such as traffic or air conditioners typically occupy low frequencies that will sound like a rumble in your recordings, which is quite unpleasant to listen to. What is the VideoMic NTG’s auto-power feature? To connect your VideoMic NTG to a Lightning-equipped iOS devices, such as an iPhone, iPad or iPod, you need to use the RØDE SC15 cable. The output features intelligent circuitry that automatically detects whether your microphone is plugged into a TRS input (found on most cameras) or a TRRS input (which most smartphones and tablets have) and switches to accommodate. If your iOS device has a Lightning connector, you will need to use an Apple-certified 3.5mm to Lightning adaptor to plug your VideoMic NTG in.
This Notification Icon Is Not Currently Active Bluetooth,
Apologia Pro Vita Sua Pronunciation,
Chickpea Shakshuka Bon Appétit,
Onkyo Receiver Setup,
Myr Retriever Price,
Healthiest Maple Syrup,
Medium Wavy Hair Men,